Gift Set – The Crafter’s Workshop

Hey Hey Everyone!!!

Today I would like to share with you all how I created my own wrapping paper and card for a dear friend of mine.

To begin I started with the wrapping paper, for this I used plain white tissue paper. I mixed TCW9016 Spun Sugar Heavy Body Acrylic Paint with TCW9020 Raspberry Sorbet and TCW9024 Kale Smoothie Heavy Body Acrylic Paint.

I also mixed TCW9016 Spun Sugar Heavy Body Acrylic Paint with TCW9022 Grape Jelly Heavy Body Acrylic Paint to create the tones I wanted.

I also used TCW9018 Orange Slice and TCW9013 Iridescent Gold Heavy Body Paint as my other 2 colours. Next using the rough side of the tissue paper I applied my paints to TCW779 Wild Roses 12×12 stencil using a make up sponge.

I set it aside to dry, I didn’t use a heat tool as I didn’t want to burn the tissue paper and this is how it turned out.

Now for the card, I used TCW779 Wild Roses 6×6 stencil for my card and used washi tape to keep the stencil in place.

The tool I have used is from Kmart here in Australia and it is a make up sponge and brush. I found this was great as it has a tip on it. I used Distress Inks Spiced Marmalade, Picked Raspberry and Evergreen Bough as they were the closest colours I had to match the wrapping paper.

Then I added TCW9013 Iridescent Gold Heavy Body Paint to finish off the background.

I then stamped my sentiment using my Stamp Platform and a Heidi Swapp stamp set onto some white cardstock.

To finish off the card, I inked around the edges using Distress Ink Victorian Velvet and my blending tool. Then used foam dots to adhere my sentiment.

Thanks for dropping in and I hope I have inspired you to create your own wrapping paper for that special friend.

Farrel Tailor xx

 

Advertisements

Live Laugh Love Converted MDF Board

Hello Everyone, today I am up on The Crafter’s Workshop blog with this off the page MDF Phrase that I converted into an apron Hook for my craftroom.

Farrel-Tailor-apron-hook

 

This project is all about layers so please be preapred there are a lot of process photos but the process itself it quite simple. So lets get started!!

The Crafter’s Workshop provided me with some product to create this project. The opinions I share are solely my own.

I started by giving the mdf board a light standing using fine sandpaper. I then covered it with TCW9016 Heavy Body Acrylic Paint – Spun Sugar using a paint brush. I decided to use paint instead of white gesso because I wanted the rawness of the mdf to come through.

20170829_121716 20170829_122349

Once the paint was dry, I then mixed TCW9016 Heavy Body Acrylic Paint – Spun Sugar and TCW9023 Blue Jellybean Heavy Body Acrylic Paint together and using a dry brush applied to the the board.

I wanted to create a more worn look so I used a wide dry brush to apply some more Spun Sugar acrylic paint and then added some highlights using Nuvo Embellishment Mousse in 3 colours – Powder Blue, Aquamarine and Pacific Blue. As you can see I’m using my finger to rub randomly onto the MDF board.

20170829_125702 20170829_123728

Next I mixed some Distress Spray Stain – Weathered Wood with TCW9008 Clear Modeling Paste. Using the TCW742s Hard Textures stencil, I applied my coloured modeling paste through the woodgrain section using an old gift card.

20170829_130908 20170829_130853

I used my heat tool to dry the modeling paste and then lightly brushed my Faded Jeans Distress Ink Pad over the stenciled areas to add some depth. I then used my finger to again rub over the board using some gold texture paste. Next I sprayed all over using Prima Color Bloom Spray Soft Teal and heat set it.

20170829_141804 20170829_143238

I felt there was something else it needed to finish off the worn look, so I added some Prima Art Alchemy Bronze Age Wax using my finger to just highlight certain areas.

20171121_105340

Then to finish it off I curled some metal oval embellishments to create hooks and adhered them to the back of the board using a hot glue gun. And finally I sprayed some white and gold twine with Prima Color Bloom Spray Worn Leather and tied this to the board so I can hang on my wall.

20171121_145003 20171121_150459

Here are some close ups of the end result…

20171122_132013 20171122_131959

 

Thanks for dropping by and I hope this has inspired you to be creative this week xx

 

 

A Dream is a Wish Art Journal Page – TCW DT

I am super excited to be sharing with you all my first creation using some amazing stencils and TCW mixed media products. There is also a process video at the end of the blog if you would like to see how I created my art journal page.stenciled-art-journal-farrel-tailor

*The Crafter’s Workshop provided me with some product to create this project. The opinions I share are solely my own.*

I started by building my background, I stamped onto some tissue paper using black archival ink and the Darkroom Door stamp – Measuring Tape, then adhered to my page using TCW9011 Clear Matte Gel Medium.

farrel-tailor-matte-medium

Once it was dry, I then blended Heavy Body Paints in TCW9017 Lemon Custard, TCW9018 Orange Slice and TCW9020 Raspberry Sorbet using a make up sponge I bought from one of my local cheap shops. These paints are such a dream to use and dry very quickly which is always a positive!!

farrel-tailor-heavy-body-paint

Next I used the TCW735 6×6 Lacy Tiles stencil and TCW9016 Spun Sugar Heavy Body Paint. I did originally want to only use parts of the stencil but I ended up falling in love with this design and decided to fill in the gaps with the stencil.

farrel-tailor-stencil-spun-sugar

Once the background was dry, I then used TCW9009 Black Modeling Paste to stencil through the TCW726 6×6 Onion Blossoms stencil. This paste is amazing!!! It’s so thick and but not too heavy on the page.

farrel-tailor-stencil-black-modeling-paste

To finish off the page I added some lines on the onion blossoms using a white paint pen and added a title using some stickers.

Thanks for dropping by and I hope this has inspired you to create something special in your art journal.

A Dream is a Wish – Art Journal Page

Hello Lovelies!!

I am super excited to be sharing with you all my first creation using some amazing stencils and TCW mixed media products. There is also a process video at the end of the blog if you would like to see how I created my art journal page.

(please excuse the auto focusing on the video – I had changed the settings and didn’t realise until I was editing. I have fixed this so I won’t be touching the settings again lol)

farrel-tailor-stenciled-art-journal

Materials Used:

TCW Heavy Body Acrylic Paint – TCW9017 Lemon Custard, TCW9018 Orange Slice, TCW9016 Spun Sugar and TCW9020 Raspberry Sorbet

TCW9011 Clear Matte Gel Medium

TCW735 6×6 Lacy Tiles stencil

TCW726 6×6 Onion Blossoms stencil

TCW9009 Black Modeling Paste

Uni Posca 0.7mm white and black paint pens, Tim Holtz small talk stickers, Tissue Paper and Darkroom Door Measuring Tape Stamp

Thanks for dropping by until next time – Stay Crafty!!!

xx