Altered Skull Cup

Happy Hauntings Everyone!!! I am back with another Halloween themed project for Art Anthology and this time I decided to alter a plastic skull head cup I found at Kmart here in Australia.

  1. I started by painting my cup and Dusty Attic chipboard pieces with black gesso. I then used modeling paste and AA’s Cracked stencil to create the illusion of veins.

2. Once dry, I then applied Bone Stone Effects with my palette knife randomly all over the cup and dried with my heat tool.

3. I then adhered my chipboard pieces and painted again with black chipboard. Once it was dry, I then added Black Leather Jacket Sorbet Dimensional Paint all over and dried again.

4. Next I used Tango and Boysenberry Velvet Dimensional Paint to colour the chipboard spider and flourish.

5. I then used Nuvo Embellishment mousse to colour the all over the black gesso area.

6. To finish off the cup I then added Rust Texture Set  and some small plastic spiders.

Art Anthology products Used

Velvet – Tango and Boysenberry

Texture Effect – Rust Texture Set 

Stone Effects –  Bone

Sorbet – Black Leather Jacket

Stencil – Cracked

Thank you for stopping by today! If you need more inspiration check out Art Anthology on Pinterest and YouTubeJoin our Facebook group Art Anthology’s Adventures in Artwhere you can share your creations!

 

Altered Notebook

Hi there my lovelies!!!! I back again to share another DT project Art Anthology and today I am sharing my altered notebook. If you would like to watch me create this please click on the video at the end of the blog xx

  1. To start I covered my notebook with tissue paper and then covered with black gesso. I also applied a coat of black gesso to my chipboard pieces and resin.

 

2. Once everything was adhered, I then used the dry brushing technique using Cotton Velvet Dimensional Paint all over.

3. After drying I then sprays Patience Colorations Spray all over. Then dry brushed Boysenberry Velvet Dimensional Paint to the chipboard and resin pieces.

  

4. Then after a quick dry, I applied Teal Shine Dimensional Paint. Once I was happy with the blend of colours, I then used a gold mousse to highlight all over the notebook.

5. I added some glass glitter and then applied Fiji Velvet Dimensional Paint. I found that the notebook needed a little more “pop” and once I added this, I was happy.

This is the list of products that I used:

Velvet: Fiji, Cotton, Boysenberry

Colorations: Patience

Shine: Teal

Thanks for dropping and can’t wait to share my next project with you all soon xx

 

Sweet Memories Photo Frame for Dusty Attic

Hello there everyone!!! Today I am sharing my first project for the month for Dusty Attic. Here in Australia we have just begun spring and I wanted to create something that shows that celebrates that.

Sweet Memories Altered Frame by Farrel Tailor

The frame I used is a MDF Kaisercraft frame. I coated the frame and all chipboard pieces with white gesso. Next I stenciled all the way around the frame using modeling paste and Mandala stencil. Once all dry, I then used Jade Impasto paint to cover the frame and then with my finger applied Nuvo Embellishment Mousse to highlight the stencil.

Altered Frame by Farrel Tailor

I also used the a gold Nuvo Embellishment Mousse to colour the chipboard title. For the flourish chipboard, I left the bottom layer white and heat embossing the top layer with gold embossing powder. I adhered the layers together and then cut in the middle to make 2 pieces.

frame-sweet-memories.jpg

Then I arranged the chipboard and flowers to the bottom of my frame. I used micro beads and some fibres to add some texture then added a highlight with the Nuvo Embellishment Mousse on the flowers.

Dusty Attic Products

Layered Garland

layered_garland__48407_zoom

Mandala Stencil

mandala_stencil__17764_zoom

Mini Captions #10

MC_10__32836_zoom

Thanks for dropping by and I will be back real soon with another project xx

Farrel Tailor

Remember Today Altered Frame – Dusty Attic

Hello Everyone, today is my turn again on the Dusty Attic blog and I am sharing an altered frame I created. I recently taught this frame for the lovely ladies up at Bruce Rock here in Western Australia.Remember Today Frame by Farrel Tailor

I used a Kaisercraft frame and applied Stamperia sand texture paste for the base. Then covered the frame and all the chipboard with The Crafter’s Workshop Black Gesso TCW9002.

Altered Frame by Farrel Tailor

I sprayed some of the chipboard with Prima Color Bloom Sprays – Fir Needles and Magic Stone. Then I rubbed Nuvo Embellishment Mouse in Powder Blue and Seaspray Green over the top.

Remember Today Frame

Once all adhered I then used Art Alchemy waxes in White Gold and Green Brocade to add highlights. Then finished it off with some beads.

Dusty Attic Products Used

Mini Cogs

tiny_cogs__63802_std

Diamond Panel

diamond_panel__15305_thumb

Ornate Pendant #2

ornate_pendant_2__99042_zoom

Lace Border #4

lace_border_4__89504_zoom

Twisted Iron #2

twisted_iron_2_2245__94387_zoom

Mini Captions #10

MC_10__32836_zoom

Thanks for dropping by and I will be back again soon with more of my projects xx

Farrel Tailor

 

Picture Perfect Mixed Media Layout – The Crafter’s Workshop DT

Happy Thursday my lovelies!!!

Today I am back with another video but this time I created a scrapbook layout using some pretty cool products. So sit back, relax and I hope you enjoy both my step by step tutorial and video tutorial which is at the end of the blog xx

I started with some white cardstock and tore some strips of Tim Holtz Tissue Paper, then applied them to the cardstock using TCW9011 Gel Medium Matte. I used my heat tool to dry once I was happy.

Next I applied some crackle medium around the edges of the tissue paper. Once dry I then used Distress Oxide Sprays in Faded Jeans, Walnut Stain and Fossilized Amber to build my background. I used a paint brush to move the sprays around the page until I was happy and made sure to dry in between colours.

I love using this stamp by Darkroom Door – Number Border, it is perfect for the boy layouts. I stamped it randomly with black archival ink.

The next step I wanted to add some more texture so using TCW835 Plaid Fringe stencil in the 6×6, I used a bristle brush to apply Nuvo Embellishment Mousse.

I then used TCW9027 Grecian Gold Modeling Paste and TCW737 Love Sonnet 6×6 stencil just to add a little “Pop” to my layout.

I inked the edges of some corrugated cardstock using Walnut Stain Distress Ink and created some tags using some patterned cardstock from my stash. For the chipboard title, I applied some TCW9001 White Gesso and then used Distress Oxide Ink to colour it. I used the same 3 colours as the sprays.

To finish off the layout I inked around the edges of the cardstock with Black Soot Distress Oxide Ink and added some splatters.

 

Thanks for dropping and I hope you have enjoyed my tutorial, until next time xx

These Are Treasured Memories layout

Hi Everyone, I’m back today to share with you my interpretation of the Dusty Attic December Mood Board. These colours are just amazing and I decided to use these colours as the base of my layout.

mood board

And this is what I came up with…

cover

I started by using 7 Dots Studio Cotton Candy pp – Cloud Watching and white Cardstock as my base. Then mixed some white gesso with Distress Stain Peacock Feathers to create a light blue paint.

20171204_113032

Using my fingers I applied the paint onto my paper and used a heat tool to dry. I then applied Nuvo Embellishment Mouse – Pacific Teal using a baby wipe in a swiping motion. I then put a small amount of white gesso onto the baby wipe to help blend the mouse.

20171204_113231.jpg
20171204_115915

I also used the same mousse around the edges of the my photo mount before adhering my photo.

20171204_115045

Next I used Lindy’s Stamp Gang Starburst Spray – Shabby Turbine Teal to create depth around the torn edges of my paper using a paint brush and some water.

20171204_121531

I then added some texture by using TCW Light and Fluffy Modeling Paste and TCW662s Mini Tile Mania stencil.

20171204_122611

Now for the chippy!!! I used Dusty Attic Geometric Border, Geometric Corners  and cut them into smaller pieces so I could build a layer with them. I then painted them and the  String Frames Small with Prima Acrylic Paint Sparks – Raven Black. Once dry I then adhered them onto my layout.

20171204_133443

I then used my finger to apply a small amount of Prima Acrylic Sparks Paint – Mermaid Sparkle and Nuvo Embellishment Mousse – Pacific Teal to the geometric pieces.

20171204_152239

I also added some stamping using Stampers Anonymous stamps – Ultimate Grunge and Slight Alterations with Ranger Archival Ink – Watering Can.

20171204_152226

Then to finish it off I used These Are Treasured Moments chipboard and lightly covered with white gesso using a make up sponge and then blended Nuvo Embellishment Mousse – Pacific Teal around the edges. And adhered a tab from Mini Tabs #7 Black.

20171204_152231

Here are the amazing products I used from Dusty Attic

mt7_black__35428_thumb

geometric_corners__07750_thumb

geometric_border__47028_std

these_are_treasured_memories__12546_thumb

string_frames_small__96778_std

Thanks for dropping by and I hope I have inspired you to join us this month for the December Mood board Challenge xx

profile pic

 

Live Laugh Love Converted MDF Board

Hello Everyone, today I am up on The Crafter’s Workshop blog with this off the page MDF Phrase that I converted into an apron Hook for my craftroom.

Farrel-Tailor-apron-hook

 

This project is all about layers so please be preapred there are a lot of process photos but the process itself it quite simple. So lets get started!!

The Crafter’s Workshop provided me with some product to create this project. The opinions I share are solely my own.

I started by giving the mdf board a light standing using fine sandpaper. I then covered it with TCW9016 Heavy Body Acrylic Paint – Spun Sugar using a paint brush. I decided to use paint instead of white gesso because I wanted the rawness of the mdf to come through.

20170829_121716 20170829_122349

Once the paint was dry, I then mixed TCW9016 Heavy Body Acrylic Paint – Spun Sugar and TCW9023 Blue Jellybean Heavy Body Acrylic Paint together and using a dry brush applied to the the board.

I wanted to create a more worn look so I used a wide dry brush to apply some more Spun Sugar acrylic paint and then added some highlights using Nuvo Embellishment Mousse in 3 colours – Powder Blue, Aquamarine and Pacific Blue. As you can see I’m using my finger to rub randomly onto the MDF board.

20170829_125702 20170829_123728

Next I mixed some Distress Spray Stain – Weathered Wood with TCW9008 Clear Modeling Paste. Using the TCW742s Hard Textures stencil, I applied my coloured modeling paste through the woodgrain section using an old gift card.

20170829_130908 20170829_130853

I used my heat tool to dry the modeling paste and then lightly brushed my Faded Jeans Distress Ink Pad over the stenciled areas to add some depth. I then used my finger to again rub over the board using some gold texture paste. Next I sprayed all over using Prima Color Bloom Spray Soft Teal and heat set it.

20170829_141804 20170829_143238

I felt there was something else it needed to finish off the worn look, so I added some Prima Art Alchemy Bronze Age Wax using my finger to just highlight certain areas.

20171121_105340

Then to finish it off I curled some metal oval embellishments to create hooks and adhered them to the back of the board using a hot glue gun. And finally I sprayed some white and gold twine with Prima Color Bloom Spray Worn Leather and tied this to the board so I can hang on my wall.

20171121_145003 20171121_150459

Here are some close ups of the end result…

20171122_132013 20171122_131959

 

Thanks for dropping by and I hope this has inspired you to be creative this week xx