Full of Possibilities Mixed Media Tag – The Crafter’s Workshop DT

Hi Everyone and happy Thursday!!! Today I am on The Crafter’s Workshops Blog with this mixed media tag. I know, I am very late on the old Tim Holtz Paper Dolls but I am sooo in love with these and how good do they look with TCW stencils?!

Below is the process video for my tag so please feel free to watch and share with your friends. I have subtitles throughout the video of all the products I have used. Here are some close ups of the end results.

Today is full of possibilities by Farrel Tailor

Thanks for dropping by and I will be back very with another project

Farrel xx

Advertisements

Sail The Seas Mixed Media Tag for Dusty Attic

Hello there my fellow crafters!!! So some of you would have seen on my social media links that was I recently teaching on a crafting cruise, one of the lovely ladies on the cruise asked us to join in on a tag swap. The theme was sail the seas so I this is what I created.

Sail The Seas Tag for Dusty Attic

To begin I coated my tag with TCW9007 Clear gesso. Once dry, I then created my background using Distress Oxide Inks and sprays. Then stamped a wood grain stamp over the top, I used Tim Holtz Birch and Pine stamp set.

tag background

I applied a thin coat of TCW9001 white gesso on all my chipboard pieces. For the Port Hole chipboard, I used Distress Oxide Ink pads to create a rusty patina effect.

DA Port Hole

I also used the Distress Oxide Ink Pads to the Adventure tab and the mini fish skeleton chipboard.

DA skeleton Fish Mini

For the compass chipboard I lightly brushed the coffee and sepia archival ink and then painted TCW9028 Antique Gold Modeling Paste.

DA Camping icon

I trimmed the Fish Net panel down to the size I wanted and then heat embossed using Stampendous Aged Ivory Embossing Enamel. I then adhered it to the tag and wrapped some twine around the the tag.

DA Fish Net Panel

I used Graphic 45 By The Sea collection for the ship in the port hole and the backing of the tag. To finish off the tag I added some art stones and glass beads.

Dusty Attic Tag by Farrel Tailor

Dusty Attic Products Used

Fish Net Panel

Fish_Net_DA0654__71475_zoom

Port Holes

port_holes_2149__33884_zoom

Skeleton Fish Bones Mini

skeleton_fish_bones_mini__90882_zoom

Wordpl@y #1

word_pl@y#1__69327_zoom

Camping Icons

camping_icons_2172__71885_zoom

I hope you enjoyed my tutorial and happy creating xx

Farrel Tailor

Mixed Media Tag – Aussie YouTube Hops Feb 2019

Hello there lovelies!!!! Today I have a new process video up on my channel for Aussie YouTube Hops. This is a new design team I was asked to join and it a group of Australian artist sharing our love of creating. There is a facebook page you can join where we share our creations with you all. The link is below so please feel free to join.

https://www.facebook.com/groups/AussieYoutubeHoppersandFriends/

The theme for this month is

49210841_10161229169460608_8971727618059534336_n

And here is my project…… My inspiration came from our amazing beaches

Farrel Tailor - Beach Theme Tag

Here is my video, I hope you enjoy and please don’t judge on my bad voice over at the start of the video lol

Thanks for dropping by

Farrel xx

 

Believe In Daydreams Mixed Media Tag

Hi Everyone Farrel here and today I am sharing another mixed media tag with you all. I have process shot so sit back and relax while to take you through on how I created this.

mixed media tag by farrel tailor

I had so much fun creating this tag, I have only recently discovered my new found love when I created the Christmas Tag last month and I have decided to create tags for everything now!!! lol

TCW809.jpg

To start of I used the Tim Holtz large Tag Die cut out my chipboard tag. I then covered the tag using some patterned paper I found in my stash. I applied a light coverage of Gel Matte Medium (TCW) and once dried I then used TCW804 Mesh Blocks stencil with some sand texture paste.

stamping.jpg

Once the paste was dry, I then added some stamping using Black Archival Ink and a Finnabair stamp.

20190115_123911.jpg

Then I used the 3 LSG magicals in the picture to build up my background colours. I love how the sand texture paste looks with these colours added to it.

20190115_124529.jpg

Next I coated my Dusty Attic chipboard and a metal flower with white gesso. I did cut the Industrial Corner and the Cyclone Wire to fit the tag.

20190115_125322.jpg

I then decided to use Finnabair’s Rust Effect Paste on the chipboard pieces and the metal flower. I also used Sepia Archival Ink to cover the ticket chipboard.

20190115_131706.jpg

I used TCW Iridescent Gold Heavy Body Acrylic Paint on the Prima Flowers and once all the pieces were adhered, I then added some Sisal, Mica Flakes and some beads.

believe in daydreams tag by farrel tailor

dusty attic altered tag by farrel tailor

Dusty Attic Products Used

Industrial Corners

industrial_corners__23634_zoom

Industrial Globes #3

industrial_globes_3_2184__66199_zoom

Tickets

tickets__01810_zoom

Cyclone Wire

cyclone_wire_small_0737__27377_zoom

Thanks for dropping by and I hope you enjoyed my project xx

Farrel Tailor

Christmas Card and Tag – The Crafter’s Workshop

Hi there my lovelies!!!! Today I am sharing with you all a mixed media Christmas card and tag I created for The Crafter’s Workshop. For those who know me, I am not a card maker but thought it might be nice for me do something a little different.

The Crafter’s Workshop provided me with some product to create this project. The opinions I share are solely my own.

I will start my tutorial off with the card. I used a 5 1/4 x 5 1/4 inch card as the base and applied my Emboss It Dabber to TCW720 Snowflakes 6×6 stencil. Then used white embossing powder to cover the whole area and heat set with my heat gun.

Then I sprayed 13arts Ayeeda Mist Chalk light blue and Lindy’s Stamp Gang Starburst Delphinium Turquoise spray all over the card.

Next I used a separate piece of cardstock and applied TCW9049 Tacky When Dry Gel Medium through TCW717 Ornaments 6×6 stencil. I used my heat gun to make the drying process faster then rubbed some mixed media transfer foil over the top.

I then cut out the ornaments and used foam tape to mount them onto the card. I also adhered some ribbon to the top and used a sticker for my sentiment. To finish off the card, I used Couture Creations Glitzin’ Glamour in Antique Silver.

Now for the tag, I used a precut tag in white and smooshed Distress Inks Broken China and Stormy Sky all over the tag. Then did the same again but with Distress Oxides Ink Weathered Wood.

Once the inks had dried, I then used  TCW720 Snowflakes 6×6 stencil and applied TCW9026 Champagne Gold modeling paste. I used my heat gun to dry the paste, letting it bubble a little.

I used some stamps, snowflake punches, glitter and rhinestones to add some texture. To colour the stamped image, I used the Distress Inks Stormy Sky and Weathered Wood to make a grey/green colour and applied with an aqua pen.

Thanks for dropping by and I will back again soon with my next project xx

 

Christmas Tag – Dusty Attic

OMG can you believe it is December?!!! Where the heck has this year gone? Well today is my turn up on the Dusty Attic blog and I am sharing with you my interpretation of this month’s mood board….. and can I just say Wow!!! I love these colours this month, very rarely will I do anything with a Christmas theme. Not because I don’t like Christmas….. I LOVE Christmas but I find it is a busy time of year and photo’s are never how I like them but I thought I would change it up this year and create a Christmas Tag.

26167275_10214205909602884_1533054477810715677_n

I used a chipboard sheet and cut it to 3 1/4 x 6 1/4 inches. The first paper layer is a Basic Grey pp and the second is 7 Dots Studio – Cotton Candy range.

Christmas Tag by Farrel Tailor for Dusty Attic

I tore up a piece of corrugated cardstock and dry brushed white gesso onto it. I adhered it and some cheesecloth to the tag. I also cut a silver and white paper straw in half and adhered it to the corrugated cardstock.

Christmas Tag by Farrel Tailor

I used white embossing powder to cover my small string frame and Twisted Iron #2 chipboard and adhered them to the tag. I painted the flowers with Art Alchemy Metallique Light Patina acrylic paint and added some antique silver Glitzin’ Glamour to the center of the flowers before adhering to the tag.

Christmas Tag

Next I covered the Wordpl@y #5 with white gesso, making sure I get into the letters. Once dry I lightly covered the chipboard with some silver ink. Then to finish off the tag I added some art stones and pebbles as fillers and added a chalk spray in turquoise over the art stones.

Christmas Tag by Farrel Tailor for Dusty Attic

Dusty Attic Products

Wordpl@y #5

wordpl@y5__34229_zoom

Twisted Iron #2

twisted_iron_2_2245__94387_zoom.jpg

String Frame Small

string_frames_small__25380_zoom

Thanks for dropping by and I hope this has inspired you to give this month’s mood board a go xx

profile

Mixed Media Father’s Day Tags

Hello Everyone!!! Today is my turn on the Helmar Creative Blog and I was given the theme of Men. So I decided to create some tags for Father’s Day.

Farrel Tailor Helmar Fathers Day Tags

To start with the tags I used Distress Oxide Ink in Tea Dye and stamped it on my craft mat. Then sprayed some water and smooshed my tag through the ink.

Tea Dye Distress Oxide

I used the same technique using Frayed Burlap making sure I dried between each colour.

Frayed Burlap Oxide

I then sprayed a coat of Helmar Crystal Kote Fixative Spray to seal those colours and then added Crushed Olive Distress Oxide ink. This spray stops the colours from turning into a muddy mess.

Helmar Crystal Kote Fixative Spray

Crushed Olive Distress Oxide

I used the same technique again with Peeled Paint Oxide Ink and used my heat gun to dry.

Peeled Paint Oxide

Then inked around the edges using Vintage Photo Distress Oxide Ink.

Vintage photo oxide

Next I added some stamping using black archival ink and some Tim Holtz stamps.

stamping

I wanted to add some texture so I stamped this Darkroom Door stamp onto some calico and frayed the edges.

DRD measuring tape

Then used Helmar Fabric Glue to adhere it to the tag.

helmar Fabric Glue

To add some height I used Helmar Scrap Dots adhesive to the back of my gentleman and placed them onto my tag.

Helmar Scrap Dots

Then to finish the tag off I stamped some letters onto some white cardstock and used Stormy Sky and Vintage Photo Distress Oxides. Then adhered them to the tag using Helmar Premium Craft Glue.

Helmar Craft Glue

Here is a close up of the finished tag.

FTailor mixed media tag

Thanks for dropping by and I hope this project has inspired you xx

Farrel Tailor Helmar Fathers Day Tags

DT Footer